Envalior will showcase sustainable thermoplastics, along with a new halogen-free flame-retardant PBT at Booth #1 during the “Fuse Box Meets Dryer – Plastics in E&E Applications” conference organised by the South German Plastics Center (SKZ).
Envalior
386579971
Various automatic circuit breakers, isolated on black background. Electric fuse.
The conference, which focuses on material innovations for global trends, including electromobility, autonomous driving, 5G mobile communications, will be held May 14 - 15, 2025 at the Vogel Convention Center in Würzburg, Germany.
"During the conference, we are focusing on Envalior’s broad portfolio of engineering plastics, which consist of sustainable raw materials. This portfolio is designed to help our customers worldwide reduce the carbon footprint of their products, become less dependent on fossil raw materials, preserve resources and contribute to the development of material cycles. Another key topic is our new generation of halogen-free, flame-retardant PBT compounds Pocan. In addition to high flame retardancy, we have equipped them with other properties that are advantageous for E&E applications. For example, we are featuring Pocan BFN4221Z, which is characterised by excellent mechanical properties," said Alexander Radeck, Manager of E&E in Technical Marketing at Envalior.
Sustainable material solutions
Envalior plans to offer its entire portfolio on a bio-based and/or recycled basis by 2030. At the SKZ conference, the company is featuring Durethan ECOBKV30FN04 and BLUEBKV30FN04 to show the opportunities that such products create in terms of sustainability. The two halogen-free, flame-retardant polyamide 6 compounds reinforced with 30% glass fibres by weight are a sustainable alternative to the purely fossil-based Durethan BKV30FN04, which has established itself in the E&E industry, in the manufacture of high-voltage connectors. They contain 30% and 86% sustainable raw materials, respectively, including glass fibres in which mineral raw materials have been replaced by industrial glass waste.
The sustainable proportion in the compounds is certified according to the ISCC (International Sustainability and Carbon Certification) mass balance method. The CO2 footprints of both compounds are 7% and 61% lower, respectively, compared to their fossil-based counterparts. The use of sustainable raw materials does not mean compromising on the mechanical properties of the compounds. Both compounds have the same chemical, physical and processing properties and the same quality as their fossil equivalents. They comply with the same technical specifications and certifications.
A material solution for overmoulding metal parts
Envalior’s new material, Pocan BFN4221Z, is reinforced with 20% by weight of short glass fibres. Particular advantages of this PBT compound are its high elongation at break of 2.9% (ISO 527-1,-2) and good Charpy impact strength (ISO 179/1eU) of 45 kilojoules per square meter. The elongation at break is even higher than that of comparable PBTs with halogen-containing flame retardants.
Components made from the new material are more resistant to cracking, plus connecting elements such as snap fits are easier to design. Due to its high elongation at break and temperature resistance, the material is also particularly resistant to thermal shock. It is therefore ideal for overmoulding metal components exposed to rapid and large temperature changes. Thus, components made of the material have little tendency to form stress cracks in the event of frequent temperature jumps.
The high flame resistance of the PBT compound is evident in the V-0 classification in the UL (Underwriters Laboratories Inc.) 94 test. This classification applies to all colours with test specimen thicknesses of just 0.4 millimetres. Compared to PBT grades with halogen-containing flame retardants, Pocan BFN4221Z is significantly more resistant to tracking with a stable Comparative Tracking Index (CTI) of 600 (IEC60112).
"In general, the high tracking resistance enables greater freedom in component design. This is because electrical assemblies can be designed with smaller distances between the metal contact pins. This results in greater component compactness without having to worry about short circuits and device defects caused by leakage currents," explained Radeck.